The reducer is one of the chemical pipe fittings and is used for the connection of two different pipe diameters. It is divided into concentric size head and eccentric head. When the projection of the two ports is concentric circles, it is called concentric reducer, and the projection of the eccentri

The pressure grade is divided according to the pressure level: 3000LB, 6000LB, 9000LB or SCH80, SCH160, XXS commonly used to make the material for the common raw materials of carbon steel, stainless steel, alloy steel and so on. Carbon steel is commonly used with Q235, 20#, A105, etc. There are 304,

The socket bend is mainly made of round steel or ingot moulding forging, and then a high-voltage elbow pipe connecting fitting is made by lathe machine. It is a kind of forging socket pipe fitting. Common standard for socket bend are standard GB/T14383-93, GB/T14383-2008, American standard ASME B16.

Forging bend mainly include socket welding elbow and thread Angle, including forging bend and 45 ° forging bend, 90 ° forging bend, forged socket welding elbow pressure are divided into: 3000 lb, 6000 lb, 9000 lb, 3000 lb adapter socket welding elbow pipe wall thickness level for Sch80, XS; The wall

1. When the flow rate of the fluid in the pipeline changes, such as increase or decrease, and the change of flow rate is not great, the reducer should be adopted.2. In the inlet of the pump, the reducer should be used to prevent cavitation.3. With the instrument, such as the flow meter and the regul

What is the requirement of the steel plate material used in stainless steel tube straight pipe? The details are as follows:1 steel plate material(1) steel plate manufacturers: steel plates produced by shaosteel, liusteel, ma steel and angang are required;(2) the material of steel plate shall be in a